1. Confirm that the dimensions of the finished package are correct.
2. Check whether the original materials meet the company’s requirements.
A. Fabrics and linings (whether yarn thickness, color, density, thickness, color fastness meet the standards, adhesive-backed PVC must not be whitened and soft, yarn clean, bright, and drawn)
B. Mesh cloth (mesh shape, gram weight per meter, color)
C. The artificial leather must reach the thickness required by the order, and the adhesive must be dense enough not to tear easily.
D. Nylon zipper (according to the order, whether the size, specifications, color, and color fastness of the main zipper, pocket zipper, and inner zipper are correct, the teeth must not be noisy, smooth, and not jammed or too tight. The density and width of the zipper cloth edge must meet the specific order requirements)
E. Slider + slider (size and specifications of the slider, with or without keyholes, the nose of the slider should not be broken, and whether the letter, color and size of the slider are correct)
F. Webbing, edging, elastic (color, texture, gram weight, thickness, color fastness, elasticity)
G. Tube strip, corner strip (color, color fastness, material, size and specifications are correct)
H. Plastic accessories (handle, buckle, hook buckle, D-shaped buckle and other plastic products must be subjected to destructive testing, whether buckle, hook buckle, D-shaped buckle, business card frame, and other buckle size, color, shape, etc. Order requirements)
I. Hardware accessories (color, anti-acid treatment, size, wire diameter, special anti-rust treatment of steel nails)
J. Steel wire, iron frame, honeycomb frame (diameter of steel wire, width of iron frame, honeycomb frame after molding)
K. Pull cylinders and wheels (the levers must be pulled smoothly, without noise and heavy shaking, the finger-type levers must be pressed before they can be pulled up or lowered, and each of the three and two quarters must be stuck)
L. Whether the trademark (letter, size, color, etc.) is correct, and whether the label is correct.
M. Packaging (elevator, hanging line, carton, quality and printing content is correct)
3.Finished product inspection: front, back, middle, inner
A. Whether the front film is flat and no wrinkles at the corners
B. The straight line of the splicing piece should be straight, and the fake line should not be exposed
C. The corners of the tube strips on the front and back should be symmetrical
D. The position of the middle rib webbing is in the position after the retractable zipper is opened.
E. After the side nails are finished, there should be no snagging or breakage. The handle should be flat, and there should be no gap between the square circle, the flat handle and the pipa head.
F. The back card business card pocket must not be crooked, symmetrical to the left and right, and the back corners must not be wrinkled.
G. There must be no gap between the angle wheel and the tube, the angle wheel must be parallel to the bottom when assembled, and there must be no internal and external characters
H. The front feet must be hit on the second lane of the double lane
I. All linings, edging belts, zippers, and mesh fabrics must have no color difference
J. Trolley case inclusive hemming joint should be at the lower quarter
K. Needle pitch of car thread
L. Length of soft shoulder strap
M. When nailing, the nail must bloom well
N. Before packaging, the finished package must be clean, and the wireless head