I. Safety inspection of toy inspection:
1. All countries in the world have strict requirements on toy safety. At present, foreign consumers frequently claim for compensation from domestic toy manufacturers for safety problems. Therefore, the safety of toys must be paid great attention to.
A. The manual needle must be placed on the fixed soft bag, not directly inserted into the toy, so that the needle can be pulled out without the human;
B. The broken needle must find another needle, and then report the two needles to the workshop supervisor for new needles. Toys that cannot find the broken needle must be searched through the probe;
C. only one work needle can be sent out for each hand. All steel tools should be placed uniformly, not arbitrarily;
D. Use the steel brush to brush properly. After brushing, feel the bristles by hand.
2. Accessories on the toy, including eyes, nose, buttons, ribbons, bow ties, etc., may be torn off by children (consumers), which may lead to danger. Therefore, all accessories must be tightly fastened and meet the tension requirements.
A. eyes and nose must bear A tension of 21LBS;
B. ribbons, flowers and buttons must bear 4LBS of tension;
C. The post quality inspector must often test the tension of the above parts, sometimes find problems, and solve them together with the engineer and the workshop;
3. All plastic bags used for packaging toys must be printed with warnings and perforated at the bottom to prevent children from putting them on their heads.
4. All filaments and meshes must have warning words and age signs.
5, all the toys, accessories must not have toxic chemical substances, so as to avoid the danger of children’s tongue licking;
6. Scissors, drill and other metal items shall not be left in the packing box.
II. Inspection of toy packaging:
A. Check whether the label of the outer carton is correct, whether there is wrong printing or missing printing, and whether there is useless wrong outer carton. Whether the printing on the outer box is in conformity with the requirements, oil stains or blurring is not acceptable;
B. Check whether the tag of the toy is complete and used incorrectly;
C. Check whether the playing method and position of the toy tag are wrong;
D. any serious or minor defects found in the stuffed toys must be identified to ensure that they are not defective;
E. Know customers’ packaging requirements and correct packaging methods. Check for errors;
F. Plastic bags for packaging must be printed with warning slogans, and the bottom of all plastic bags must be punched;
G. To know whether the customer requires to place instructions, warning books and other paper in the box;
H. Check whether the toys in the box are placed correctly, and it is unacceptable to squeeze too much or space;
I. the number of toys in the box and the number of labels on the box must be the same, not a few;
J. Check whether there are scissors, drill and other packaging tools left in the box, then seal the plastic bag and the carton;
K. When sealing, non-transparent adhesive paper shall not cover the words of box marks;
L.Fill in the correct container number. The total must match the order quantity.